background image

1.3   A word to the operator

• You must read and understand the safety

section in this operator's manual, and the

manuals for all implements, before you operate

this machine.

• The safety procedures in this manual increases

protection to all personnel in and around the

machine, while it is in operation or during

maintenance.

This safety section:
• Tells you some of the basic hazardous

situations that can occur during the usual

operation and maintenance of the machine.

• Gives you procedures that can help prevent

these hazards.

• Adds to the safety procedures in other sections

of this manual.

GUID-AC91CCF6-1FF8-4A85-97A1-2D1562806825-high.jpg [High]

Fig. 1  

Precautions:
• Injury or death can occur if you do not obey these precautions.
• Other precautions can be necessary when you attach implements to the machine.
• Other precautions can be necessary when the conditions change in the work area, or area where you

do the servicing.

• The manufacturer is not liable for the machine:

- If you do not use the machine for its intended use.
- If you do not operate the machine correctly.
- If you do not do the correct inspections of the machine.
- If you do not lubricate the machine correctly.
- If you do not obey the maintenance schedule.

• It is your responsibility to obey the safety procedures when you operate, or do work on the machine.

Before you operate the machine, make sure that you have the approval to use it.
To have the approval to use this machine you must:
• Know how to use it.
• Know the safety instructions.
• Obey the applicable local laws.

There is a minimum age to operate some machines.
It is your responsibility to know these laws and obey them when you operate the machine or if a situation

occurs.

For your safety and the safety of others, obey all safety decals and notices on the machine and on all

implements.
Only use equipment or implements that have the machine manufacturer's approval.
Make sure that your machine has the correct equipment that is necessary by the local laws.

Do not use alcohol or drugs when you do work with the machine. They decrease your control of the

machine.

GUID-D6DA51A7-C1FB-4F7A-9C54-888FE0B58569 [V1]

1. Safety

IDEAL Series Combine 

23

ACX2738370

Find manuals at https://best-manuals.com

Содержание IDEAL Series










































Отзывы: