FENDT Bianco Series Скачать руководство пользователя страница 46

Страница: 46 / 118

05-10

5.10 Rear ladder, roof and roof rail

(applies only for model Bianco 390 FH Sportivo as of 2009/2010)

Attention!

Take care around the lad-

der joints or you may be crushed.

Before driving, always check that the
rear ladder has been folded up and is
securely fastened.

Rear ladder

To fold down

•

Release the belt buckle and swing the hinged

part of the rear ladder down.

To fold up

•

Swing the hinged part of the rear ladder up

and hold it in place.

•

Place the buckle of the belt in the appropriate

place around both stiles and pull it tight.

Roof/roof rail/carrier system

Use only the rear ladder to access the
roof.
Be careful when using the ladder.
There is a danger of slipping if the
ladder is wet or icy.
Before using the ladder or climbing
onto the roof, ensure that the camper

is firmly positioned by extending all of

the winding stanchions.

Be careful when stepping on the roof.
There is a danger of slipping if the
roof is wet or icy.

Ensure that loads are balanced and
centred.

The maximum permissible load for the
carrier system is 75 kg.

Содержание Bianco Series























































































































Результаты поиска

Содержание Bianco Series

Отзывы:

Похожие инструкции для Bianco Series

Бренды по названию

Популярные бренды

FENDT Bianco Series, Руководство пользователя

Результаты поиска

Содержание Bianco Series

Отзывы:

Похожие инструкции для Bianco Series

Бренды по названию

Популярные бренды