1.4 Lubricant viscosities and refill capacities
1.4.1 Lubricant viscosities for ambient temperatures
Proper oil viscosity grade is determined by the minimum outside temperature while the machine is started
and while operated.
To determine the proper oil viscosity grade, refer to the minimum column in the following table.
This information reflects the coldest ambient temperature condition for starting and for operating a cold
machine.
Refer to the maximum column in the table to select the oil viscosity grade for operating the machine at the
highest temperature anticipated.
Use the highest oil viscosity allowed for ambient temperature when starting the machine.
Machines operated continuously, should use oils having higher oil viscosity in final drives and in
differentials.
Oils with higher oil viscosity will maintain the highest possible oil film thickness.
Consult a dealer if additional information is needed.
1.4.2 Lubricant viscosities
AGCO Genuine lubricants are the recommended products for this machine. The use of other lubricants
may not provide the same level of necessary performance.
Lubricant viscosities
Compartment or
system
Oil type and
classification
Oil viscosity
Celcius
Fahrenheit
Min
Max
Min
Max
Engine crankcase
AGCO® Multiguard®
Engine Oil
SAE 5W-30
-35
30
-31
104
SAE 5W-40
-35
40+
-31
86
SAE 10W-30
-25
30
-13
86
SAE 10W-40
-25
40+
-13
104
SAE 15W-40
-20
40+
-4
104
SAE 20W-20
-15
15
5
59
SAE 20W-40
-15
40+
5
104
SAE 30
0
30
32
86
Front idler hub
Midwheel hub
Drive wheel hub
AGCO® Gear
Lubricant Full
Synthetic
SAE 50
-30
50
-22
122
Hydraulic system
Transmission
AGCO® Permatran®
821XL Plus
SAE 15W-40
-20
40
-4
104
Final drive
AGCO® Gear
Lubricant
SAE 85W-140
-12
41
10
105
Fan drive
AGCO® Permatran®
821XL
SAE 10W-30
-25
30
-13
86
Implement
hydraulics
AGCO® Permatran®
821XL
SAE 10W-30
-25
30
-13
86
[V]
GUID-E8D816FA-6438-4587-B33A-299C7258D0EB [V1]
GUID-A5D4B8B8-7135-4485-BA4D-74C2F98AEAA4 [V3]
1. General
1-20
Rubber Track Tractor
79037495A
