SAFETY
A-12
700735021 E Rev.
Be aware of the size of parts when doing service work.
Never stand under or near a part being moved with lifting
equipment.
FIG. 17:
Never service, check or adjust the drive chains
or belts while the tractor engine is running.
FIG. 18:
Do not operate the machine with the drive shaft
shields open or removed. Entanglement in rotating drive
shafts can cause serious injury or death.
Stay clear of rotating components.
Never start the tractor with the PTO engaged.
Make sure rotating guards turn freely.
A loose yoke can slip off the tractor PTO shaft and result
in injury to persons or damage to the machine.
When installing a quick disconnect yoke, the spring
activated locking pins must slide freely and be seated in
the groove on the PTO shaft.
Pull on the implement driveline to make sure the quick
disconnect yoke cannot be pulled off the PTO shaft.
FIG. 19:
Disengage the tractor PTO. Turn off the tractor
engine. Remove the key. Take the key with you. Apply the
flywheel brake. Engage the knotter/needle lockout before
threading the needles, threading the knotters or adjusting
the twine tensioners.
Serious injury can result from threading the needles,
threading the knotters or adjusting the twine tensioners
with a baler running.
The needle frame and the knotters can move without
putting hay in the baler.
When working with or around the needles or knotters
always engage the knotter/needle lockout.
Do not try to remove twine from the bale chamber or
knotter while the baler is running.
FIG. 17
wc1943
FIG. 18
WC1941
FIG. 19
700720126a
