TROUBLESHOOTER’S CHECKLIST
LINE CORD
Your amplifier is equipped with a grounding type
supply cord to reduce the possibility of shock
hazard. Be sure to connect it to a grounded AC
receptacle.
DO NOT ALTER THE AC PLUG.
TUBES The ‘65 DELUXE REVERB
tube complement
consists of one Fender Special Design 5AR4 (part
number 041400), two Fender Special Design
6V6GTs (part number 023564), four Fender
Special Design 12AX7As (part number 013341),
and two Fender Special Design 12AT7s (part
number 023531). Fender’s Special Design Tubes
provide optimum performance in this amplifier. For
best results, replace with Fender original equipment
tubes only. Tube location is printed on the tube label
located inside the cabinet.
BIAS ADJUSTMENT
The control on the chassis
underside is a factory adjustment only. Should the
bias need adjusting, it should be performed by your
authorized Fender Service Center.
BLACK TOLEX COVERING CARE
The exclusive
Fender trouble covering on your cabinet is
especially designed to provide years of lasting
beauty. A very light soapy solution on a sponge
may be used to remove dirt and residue that may
accumulate in the grain. Be careful not to let any
liquid come in contact with operating surfaces. DO
NOT have the amplifier plugged into a power outlet
when cleaning.
If the amplifier is set up but does not function, check the following items:
• Is the power cord properly plugged into an electrical outlet?
• Is there power at the outlet? Is the fuse blown?
• Is the speaker properly connected to the amplifier?
• Is the amp on standby?
• Are all the control knobs turned above four?
• Is the volume control on the instrument turned up?
• Is the instrument properly plugged into the amplifier?
(Eliminate any effects pedals and try another guitar cord.)
if, after checking all of the above, the system is still not
working correctly, consult your Fender Service Dealer.
