![Fender DUAL PROFESSIONAL Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/fender/dual-professional/dual-professional_manual_4104549006.webp)
H.
EFFECTS SEND -
This sends the instrument signal from INPUTS 1 and 2 along with the reverb
out of the amplifier at a -20 dB level. It may be used to drive effects units in an effects loop, or it
may be used to drive additional amplifiers in a multi-amp set up.
I.
VIB -
Push on, push off switch that turns the VIBRATO feature on and off.
J.
CHA -
Push on, push off switch that turns the CHANNEL A/B feature on and off.
K.
LINE CORD -
(not shown) Your amplifier is equipped with a 3-prong grounding type supply
cord to reduce the possibility of shock hazzard. Be sure to connect it to a grounded receptacle.
DO NOT ALTER THE AC PLUG!
WARNING: THIS EQUIPMENT MUST BE EARTH GROUNDED.
TUBES
The Dual Professional tube complement consists of 4 Fender special design 5881/6L6WGC’s (part#
039214), 5 Fender special design 12AX7WA’s (part#013341), and 1 Fender special design 6V6GTA
(part# 023564). Fender’s special design tubes provide optimum performance in this amplifier. For
best performance, replace with Fender special design tubes only. Tube life varies with playing style
and application, but for best tone, tubes should be changed after every 500 hours of use. Tube loca-
tion is printed on the tube label, inside the cabinet.
TOLEX COVERING CARE
DO NOT have the amplifier plugged into a power outlet when cleaning. The exclusive Fender tolex
covering on your cabinet may be cleaned periodically with a sponge and a light soapy solution. Be
careful not to let liquid come in contact with operating surfaces.
TROUBLESHOOTER’S CHECKLIST
If the amp is set up but does not function, check the following items
-Is the amp power cord properly plugged into an electrical outlet?
-Is there power at the outlet?
-Is the fuse blown?
-Are the speakers properly connected to the amplifier?
-Is the amp on standby?
-Are the amplifier VOLUME, TREBLE, MID and BASS controls above 0?
-Is the instrument volume control turned up?
-Is the instrument plugged into the amplifier?
(Eliminate any effects pedals and try another guitar cord.)
Try plugging the guitar into the EFFECTS RETURN jack. Check under all tube covers to see that
the tube filaments are glowing a dull orange. If, after checking all of the above, the system is
not performing correctly, consult your Fender authorized service center.
Содержание DUAL PROFESSIONAL
Страница 1: ......