manualshive.com logo in svg

Fender Cyber-Twin, Инструкция по эксплуатации

Поделиться
Скачать
Fender Cyber-Twin Скачать руководство пользователя страница 46

                                                         

42 

   (  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

0 /  

Description

Ultra-clean guitar tone with Triangle Chorus. For best results, use with 
clean amp settings and your guitar’s neck (rhythm) pickup.

Adjustable parameters

FX

 Wet Out Level. Adjusts the wet/dry signal ratio. Select between 1.0 

for 0% wet (no effect) and 10.0 for 100% wet (all effect).

$

Chorus Rate (Hz). Range: from 0.08 Hz to 10 Hz. Adjusts the rate of 
the chorus effect. The increment of change gradually increases from 
0.01 Hz for the slowest rate to 0.08 Hz for the fastest rate.

"

Chorus Depth. Adjusts the amount of Doppler shift and how apparent 
the Chorus effect sounds. Select between 1.0 for no apparent Chorus 
effect and 10.0 for maximum effect.

#

Body. Adjusts the amount of low frequencies in this effect. Select 
between 1.0 for reduced bass and 10.0 for boosted bass.

%

Brilliance. Adjusts the amount of high frequencies in this effect. Select 
between 1.0 for reduced treble and 10.0 for boosted treble.

~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~

& 

Description

Semitone-variable pitch shifter and detuner.

Adjustable parameters

Pitch Shift Out Level. Adjusts the wet/dry signal ratio. Select between 
1.0 for 0% wet (no effect) and 10.0 for 100% wet (all effect). 

$

Pitch. Adjusts the semi-tone shift value of this effect within a four 
octave range. Select between 1.0 for a shift two octaves down and 
10.0 for a shift two octaves up from the dry, input pitch. Adjustment 
increments are made in semi-tones intervals with 5.5 being in unison 
with the input signal (no shift). Note that the farther from center (5.5) 
that you turn the knob, the more apparent the effect will be.

"

Pitch Detune. Adjusts the offset from a nominal semi-tone within one 
tone. Select between 1.0 for a detune one semi-tone flat and 10.0 for a 
detune one semi-tone sharp. Adjustment increments are made in 
micro-tone intervals with 5.5 (default) being in unison with the input sig-
nal (no detuning).

#

Pitch Feedback. Adjusts how much signal from the Pitch Shifter effect 
is recycled back to the input. Select between 1.0 for minimum levels 
and 10.0 for maximum levels. High feedback levels allow a portion of 
the signal to repeat the cycle many times thereby compounding the 
pitch shifts.

%

Pitch Pre-Delay. Adjusts the amount of delay before the pitch-shifted 
signal is heard. Can be used with the Pitch Feedback control to get 
continuously rising or falling pitch cascades with a fixed time change 
interval. For the most transparent pitch shifting, turn this control to 1.0.

[

[

[

[

Semi-tone = Half-step 

Содержание Cyber-Twin





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды