Fender CYBER-TWIN SE, Руководство пользователя

Страница: 15 / 36

w ww ww w. .f f e e n n d d e e r r. .c co om m
✧
w ww ww w. . m m r r g g e e a a r r h h e e a a d d . .n ne et t
15
Adjusts the Reverb high–frequency tone. Or, if Gated Reverb is active, this parameter
adjusts Reverb Shape with which radical decay characteristics can be achieved such as
rectangular, linear and reverse tails.
R
EVERB TONE / SHAPE Values: 1.0 (minimum) 10.0 (maximum)
Adjusts the Reverb sustain time.
REVERB TIME Values: 1.0 (shortest) 10.0 (longest)
Adjusts the Reverb decay from a sparse/irregular sound to a dense/smooth sound.
REVERB DIFFUSION Values: 1.0 (sparse) 10.0 (dense)
Shifts the equalization of the amplifier providing instant tone shaping to accommodate
playing styles or to compensate for different room acoustics.
TIMBRE Values: None Full Body Razor Edge Bright & Light Bass Booster Drop
Scoop Super Bright Squawk Acoustic Scoop
Selects the phase polarity (push/pull or pull/push) for each speaker. Fender amps with
Reverb have traditionally had speakers operating in reverse polarity due to the extra tube
gain stage necessary for Reverb. Useful when experimenting with stereo mike
placement in the studio.
SPEAKER PHASE Values: Both Standard Both Reverse Left Reverse Right Reverse
Use to compress (moderate) the range of volume output due to extremes between soft
and loud guitar playing intensities. Compression also provides sustain and is a
fundamental component of many amplifiers.
COMPRESSION Values: Off Low Medium High Even Higher
Use to set the frequency cut–off boundary for the noisegate when it is activated.
NOISEGATE DEPTH Values: 1.0 10.0
Use to set the signal level sensitivity for activating the noisegate. Affected by TRIM
setting.
NOISEGATE THRESHOLD Values: Low Medium High
Assigns a parameter to be controlled by an expression pedal (optional). Parameters in
[brackets] appear only when a particular effect or Reverb is active. For a list of effects
parameters, see page 16, for Reverb parameters, see above.
EXPRESSION PEDAL ASSIGNMENT Values: Volume Gain Treble Middle Bass Presence Reverb [FX Level]
[FX Val 1] [FX Val 2] [FX Val 3] [FX Val 4] Master Volume Reverb In Level
[Dwell] Reverb Tone [Shape] Reverb Time Reverb Diffusion
Assigns a parameter to be controlled by a MIDI continuous controller pedal (optional).
Parameters in [brackets] appear only when a particular effect or Reverb is active. For
effects types/parameters, see page16, for Reverb types/parameters, see above.
CONT. CONTROLLER ASSIGNMENT Values: Volume Gain Treble Middle Bass Presence Reverb [FX Level]
[FX Val 1] [FX Val 2] [FX Val 3] [FX Val 4] Master Volume Reverb In Level
[Dwell] Reverb Tone [Shape] Reverb Time Reverb Diffusion
Use to bypass the in or out signals for Reverb “tail” and/or effects. Or, when Vibratone
is the active effect, the Rotor Speed Fast/Slow parameter is available for switching
between two (adjustable) rotor speeds (see Vibratone, page 20).
REVERB / FX BYPASS Values: FX In Reverb In FX Out Reverb Out FX & Reverb In FX In & Reverb
Out FX Out & Reverb In FX & Reverb Out [Rotor Speed Fast/Slow]
Amp Edit Mode