CHAMPION 30 FRONT PANEL FUNCTIONS
A. INPUT 1
- Plug your guitar in here.
B. INPUT 2
- A lower impedance and sensitivity
input than input 1, useful for guitars with active
pickups. When used with passive guitars, it
provides a darker tone. Both inputs are identical if
used simultaneously.
C. NORMAL VOLUME
- Adjusts the overall
loudness of the
NORMAL CHANNEL
.
D. GAIN
- adjusts the amount of preamp
amplification in the
DRIVE CHANNEL
. Cleaner sound is
achieved at lower gain settings; high gain settings
will produce more sustain and distortion. This
control works in conjunction with the
DRIVE VOLUME
control (item F) to set the overall loudness of the
DRIVE CHANNEL
.
E. CH SELECT
- Activates the
DRIVE CHANNEL
.
F. DRIVE VOLUME
- Adjusts the overall loudness of
the
DRIVE CHANNEL
.
G. DRIVE CHANNEL INDICATOR
- When this
indicator is illuminated, the
DRIVE CHANNEL
is active.
H. TREBLE
- Adjusts the amount of increase or
decrease in the high frequency range.
I. MID
- Adjusts the overall tone quality without
affecting the signal level. High
MID
settings will
provide emphasis in the midrange frequencies
whereas a lower setting will notch the midrange.
J. BASS
- Adjusts the amount of increase or
decrease in the low frequency range.
K. REVERB
- Adjusts the amount of reverb present
in both the
NORMAL
and
DRIVE CHANNELS
.
L. FOOTSWITCH
- Plug-in connection for the
optional remote footswitch to select between the
NORMAL and DRIVE channels. For proper
operation of the footswitch, the Gain Select switch
should be out.
NOTE: Any good quality patch cord
will work with the remote footswitch, however, a
speaker grade cord is preferable to a coax guitar
cord.
M. EXTERNAL SPEAKER
- This jack provides an
output to an external speaker enclosure. The
enclosure must have a minimum impedance of 8
Ω
.
Using this jack automatically disables the
internal speaker.
N. POWER INDICATOR
- When this indicator is
illuminated, the Champion 30 is receiving AC power.
REAR PANEL
POWER SWITCH
- This switch turns the AC power
ON and OFF. When the switch is OFF, the amplifier
is completely shut down.
LINE CORD
- This amplifier is equipped with a
grounding type supply cord to reduce the possibility
of shock hazard. Be sure to connect it to a
grounded receptacle.
DO NOT ALTER THE AC
PLUG.
Содержание CHAMPION 30
Страница 1: ......
