2.4
TRANSPORT
DANGER - WARNING
TO ENSURE SAFE TRANSPORT OF THE MACHINE FROM ONE WORK PLACE
TO ANOTHER, REPLACE IT IN ITS ORIGINAL PACKAGING.
2.5.
POSITIONING/WORK STATION
a. Position the machine on a work bench or on a pedestal at a height of between 900 – 950
mm from the ground. The surface on which the machine is placed must be big enough to
guarantee machine stability at all times (Fig. 3A - 3B).
DANGER-WARNING MANUAL SAWS
Machine positioning in the work area must be performed ensuring a clearance of
at least 800 mm on all sides of the machine (see Fig. 3A).
DANGER-WARNING AUTONOMOUS CUTTING SAWS
This model of machine must only be used in a dedicated environment/area to which
unauthorized access is prohibited.
If no such work area is available, it is advisable to cordon off the machine’s operating
area (2 metres of clearance on all sides of the bandsaw) using red and white barrier
chain and yellow lines on the fl oor.
Put up a “No access to unauthorized persons” sign.
b. Position the machine in a work area with adequate lighting.
c. It is advisable to secure the machine to the workbench with M8 screws using the holes
provided on the base.
2.6.
ELECTRICAL CONNECTION
Safety Standards for electrical connections
- Check that the mains system to which the machine is to be connected is earthed in
accordance with the relative safety regulations in force.
DANGER - WARNING
CHECK THAT THE POWER SUPPLY SYSTEM IS EQUIPPED WITH A
THERMOMAGNETIC CIRCUIT BREAKER TO PROTECT ALL CONDUCTORS
FROM SHORT CIRCUIT AND OVERLOADS (SEE APPENDIX).
Preliminary tests and checks after connection
DANGER - WARNING
- BEFORE CONNECTING THE MACHINE TO THE MAINS, CHECK THAT THE
SUPPLY VOLTAGE MATCHES THE VOLTAGE INDICATED ON THE MACHINE
ITSELF.
- ONCE CONNECTED, TO AVOID ANY POSSIBLE RESIDUAL RISKS OF
TRIPPING AND FALLING, MAKE SURE THAT THE POWER SUPPLY CABLE
LIES COMPLETELY ON THE GROUND AND IS NOT AT ANY POINT RAISED
IN THE AIR.
Cont....
27
EN
ART. NG120XL, 784XL, SN120XL
ART. ABS NG120XL
Содержание 784XL
Страница 2: ......
