Femi 782XL, Руководство пользователя

Страница: 30 / 42

www.verkter.com
MAINTENANCE
BEFORE PERFORMING ANY MAINTENANCE WORK, STOP THE MACHINE AND LET IT COOL
DOWN.

Wear protective gloves.

Check the compatibility of the used blade.

Check the compatibility of the NEW blade.

Make sure that during guard opening the blade is not expelled.
RUNNING IN THE NEW BLADE
To achieve best blade performance, run the blade in by executing three cuts, applying light
pressure on the workpiece.
LIGHT PRESSURE: as an example consider an operation to cut a full steel bar (e.g. C40, / D. 50
mm). This should be carried out in about 4 minutes. Once the bladenas been run in, the same
kind of workpiece can easily be cut out in about 2 minutes.
30