Fema M40-D, Руководство пользователя

Страница: 5 / 12

User’s Manual M40-D User’s Manual M40-D
FEMA ELECTRÓNICA - Page 5
Measure Signal range Measured value
Option3
Option installed
44
92
Panel
cut-out
96
48
16 8
75
Information Menu
To enter the “Information Menu” press the SQ button. The
“Information Menu” allows to visualize information and does
not allow to modify the configuration of the instrument. It is
not affected by the “PASSWord” function. During operation
with the “Information Menu”, alarms remain “frozen” and are
kept on-hold. Leaving the “Information Menu” returns to the
measuring state of the instrument, without restart.
Information Menu Tree - See page 5.
Rollback - After 30 seconds without interaction from the
operator, the instrument leaves the “Information Menu” .
Button SQ - Selects the visible option.
Button UP - Moves vertically along the available menu op-
tions.
Button LE - Leaves selected menu or leaves the “Informa -
tion Menu” .
Information Menu - Operation
Mechanical Dimensions (mm)
Configuration
See menu for Alarm1
See menu for Alarm1
See menu for Alarm1
Alarm1
Maximum
Minimum
Memory of minimum
Option1
Option installed
Option2
Option installed
Signal Range
Input Low
Display Low
Input High
Display High
Memory of maximum
“On / Off”
“Max” / “Min”
Setpoint
Hysteresis
Delay
Setpoint2
Counts
Seconds
Second
setpoint
Configuration (Conf) - Information on the configured input
signal range (600V, 5A, ...), and the values for input low “ILo”,
display low “dLo”, input high “IhI” and display high “dhI”.
Maximum (MAX) - Value of the maximum display.
Minimum (MIn) - Value of the minimum display.
AlarmX (ALX) - Configuration of alarm X. The sequence of
information shows if the alarm is being managed (“On/Off”),
the alarm type (“Max/Min”), the setpoint, the hysteresis value,
the activation delay and the value of setpoint2 (“Off” or the
setpoint2 value).
OptionX (OptX) -
Type of module installed. If there is no
module shows “nonE”.
Measure (MEAS)- Multimeter function. Shows the value of
the input signal without scaling. This is the real value the
instrument is receiving on signal terminals.
Information Menu - Description