7
RETAIL CUSTOMERS RESPONSIBILITY UNDER THE KMC WARRANTY:
The retail customer
’
s responsibilities are:
1.
To read the Operator
’
s Manual and operate the
Disc Mower Caddy
in accord-
ance with the instructions given in this manual.,
2.
To inspect the
Disc Mower Caddy
daily, lubricate as specified and repair or
replace parts as needed, especially when continued use would cause damage or
excessive wear to other parts.
3.
To maintain and keep in place all safety shields, decals and devices.
4.
When warranty service is necessary, it is the customer
’
s responsibility to deliver
the machine to the KMC dealer from which it was purchased. Warranty repairs
should be submitted to the dealer within
thirty (30)
days of failure.
5.
Dealer travel to the machine or hauling the machine to his shop for the purpose
of performing warranty service is not allowed under KMC warranty. It is a cost
to be paid for by the retail customer. Any arrangement whereby the dealer
agrees to absorb all or part of this cost is strictly between the dealer and the
retail customer.
2.
Do not permit anyone to ride on the machine at any
time.
3.
Before starting or operating the machine, make a
walk
-
around inspection and
check for obvious defects such as loose mounting bolts and damaged compo-
nents. Correct any deficiencies before starting.
(The equipment must be
properly maintained and guarded and must be suitable to performing its
1.
All persons operating this piece of equipment should
READ
the owner
’
s manu-
al.
(In addition, the operator
’
s manual & decals on the mower itself warn
you of further danger & should be READ & observed closely.)
task.)
4.
Keep all persons a safe distance away from all
sides of the machine while it is
in operation.
SAFETY PROCEDURES:
Safety and performance are the primary
objectives of the designers of KMC
equipment. Safety features have been
incorporated into this machine where possible
and warnings given in other areas. For your
safety,
PLEASE
read and observe the
following safety procedures.
