Fema Electronica S40 Series, Руководство пользователя

Страница: 4 / 12

User’s Manual S40-A
FEMA ELECTRÓNICA - Page 4
Technical Data
Digits 4
Type 7 segments, red
Height 14 mm
Display maximum 9999
Display minimum -1999
Decimal point selectable 8.8.8.8.
Overrange 9999 flashing
Underrange -1999 flashing
Signals accepted Vac, Aac
Measure Type TrueRMS
Coupling selectable “AC+DC” or “AC Only”
Ranges selectable 600Vac
100Vac
10Vac
1Vac
100mVac
5Aac
1Aac
Connection type Phase-Neutral or Phase-Phase
Oversignal +20% of the range
Maximum input signal see table 3
Minimum input signal 0.5% of range. Reading will be “0”
for signals lower than this value.
Input impedance see table 3 (values at 50/60Hz)
Bandwidth (at 98.85%) 1.3 KHz for Vac ranges
2.0 KHz for Aac ranges
Minimum frequency 25Hz for ±1 count oscillation
Accuracy at 25ºC see table 3
Acquisitions 15 acquisitions / second
Display refresh 15 display refresh / second
Step response time <300mSec (input 0 to 95% FS)
<500mSec (input 0 to 50% FS)
<1100mSec (input 0 to 10% FS)
The response time for a TrueRMS measuring system is fast-
er for high amplitude signals. Response times are given for
input steps of 10%, 50% and 95% of the FS, calculated at
99% of end reading.
Crest Factor 3 for instrument accuracy
5 for 2.5% accuracy
Thermal stability
Offset drift see table 3
Span drift see table 3
*span drift includes also the offset drift
Power
Power “H” 85 to 265 Vac/dc
Power “L” 11 to 60 Vdc and 24/48Vac
Consumption <4W
Isolation 3500Veff for power “H”
2000Veff for power “L”
all levels tested for 60 seconds
Configuration
3 frontal push buttons
(rear jumper for range selection)
(internal jumper for coupling se-
lection)
Functions available
Fixed digits yes, configurable
Filter on display yes, recursive, configurable
Steps yes, configurable
Memory of maximum yes
Memory of minimum yes
Zeros to the left yes, configurable
Password yes, configurable
“Measure” function yes
Auto correction high yes
Auto correction low yes
Peak & Hold yes
Double setpoints yes
Brightness control yes, 5 levels
Optional boards 2 free slots
Mechanical
Mounting panel
Connections plug-in screw terminals
Weight <150 grams
Housing materials ABS, polycarbonate, vergaflex
Front size 72x36mm
Panel cut-out 69x32.5mm
Deep from panel 98mm (including terminal)
Protection IP54 standard
IP65 optional (If the housing is
opened, needs to be resealed)
Temperature Operation 0 to 50ºC
Temperature Storage –20 to +70ºC
Warm-up 15 minutes
Technical Data (cont.)
Range Accuracy Zin Max. Input Signal Offset drift Span drift
600 Vac 0.25% FS 14MOhm 1000Vac permanent 150 ppm/ºC 200 ppm/ºC
100 Vac 0.15% FS 2MOhm 200Vac permanent 75 ppm/ºC 100 ppm/ºC
10 Vac 0.15% FS 200K 200Vac permanent 75 ppm/ºC 100 ppm/ºC
1 Vac 0.15% FS 20K 65Vac permanent 75 ppm/ºC 100 ppm/ºC
100 mVac 0.20% FS 1K 4.5Vac permanent 75 ppm/ºC 150 ppm/ºC
5 Aac 0.20% FS 20mOhm 16Aac @5 sec. 75 ppm/ºC 150 ppm/ºC
1 Aac 0.20% FS 20mOhm 16Aac @5 sec. 75 ppm/ºC 150 ppm/ºC
Table 3 - Input signal range specifications