27
28
www.feltest.com
Example:
the setup on page 26 means the interval time is 15
seconds between two captures.
Press to go back to the preview mode. Then press the
capture button to start the auto capture as just set. When
the microscope is in auto capture status, the icon will
show in red at the left upper corner of the display.
Once all set frames are captured, the microscope will return to
the normal preview mode and the settings of the auto capture
mode will return to default.
If you need to stop auto capture during the set capture process,
press the capture button one time. The microscope will return
to the normal preview mode and the settings of the auto
capture mode will return to default.
From the main menu, select picture quality by selecting
super fine / fine / normal.
Quality
