
23
22
3. Tighten the Footplate bolt to 5Nm making sure to preserve the proper
orientation of the Skirt Guard Mounting Tab
4. Attach the Skirt Guard at Point 2 with one of the M6-sized bolts.
5. Pull the Skirt Guard taut at Point 1 and mark where it overlaps the bolt hole
on the Load Deck upright using your marker pen.
6. Place the scrap wood block behind the mark and, using the ¼” bit, drill a
hole through the Skirt Guard at the mark.
7. Using an M6-sized bolt, attach the Skirt Guard to the Load Deck upright.
8. Pull the Skirt Guard taught at Point 3 and mark where it overlaps the hole
on the vertical face of the Mounting Tab.
9. Place the scrap wood block behind the mark and, using the ¼” bit, drill a
hole through the Skirt Guard at the mark.
10. Using the M5-sized bolt, attach the front of the Skirt Guard to the Mounting
Tab.
11. Torque all three Skirt Guard bolts to 3Nm.
12. Repeat the procedure for the other side of the bike.
13. Check weekly to ensure that the Skirt Guard bolts are tight.
ACCESSORY INSTRUCTIONS
CONTACT
INFORMATION
Felt Racing, LLC
12 Chrysler
Irvine, CA 92618
USA
WWW.FELTELECTRIC.COM
Felt GmbH
Industriestr. 39
26188 Edewecht
Germany
Содержание BruHaul
Страница 1: ...BrüHaul OWNER S MANUAL ...
Страница 14: ......