Fels Mobilis ELITE, Руководство пользователя, Страница: 87 / 223

Composants Mobilis Elite
Horizontal curve
Curved element bent in the horizontal plane with built-in conductors and pre-mounted connections.
Description
The curves are prepared in factory with the precise radius and angle of curve needed to maintain the feeding line at a constant
distance from the travel path. Can be made for all intensities, standard range (maximum of 55°C) and high temperature (maximum
of 75°C), with or without dust-protecting lips, with or without earth marking, for curve radii of 800mm (for lower radii, please
enquire) up to infinity. They require the use of articulated trolleys. For intensities up to 130A, use curved covering flanges
(ME2000-CO) or special feed boxes for curves (ME1300-CO, ME1330-CO, ME1332-CO or ME1329-CO) to be fitted to their junctions.
Standard covering flanges and feed boxes for intensities 160A and 200A, the curves must be suspended by fixed hangers. Special
curves can be made on request, including with straight sections at the ends, or vertical curves: please enquire.
Categorie Curves
Avantage n°1 Fits exactly the layout of the circuit
Avantage n°2 Allows to build all radii
Références et compatibilités
Références et variantes
The reference indicates the direction of the curved element required (earth inside or outside). The line should be set to make the
earth side visible so as to facilitate access to the trolley connection plate. To order the version with lips, add '- LV' after the
reference, for high temperature versions, add '- HT' after the reference, for versions without earth marking, add '- B' after the
reference.
When ordering, provide additional data for radius R and angle a.
Références et variantes
Disponible avec lèvres ? oui Disponible en version haute température ? oui
Disponible en version sans terre ? oui
www.fels.fr | T +33(0)3 88 67 10 60 | F +33 (0)3 88 55 01 79 | Edité le 04/01/2017
Page 87/223