50
Maintenance
Check brake pads and brake discs
Wear
mark
Bottom of the wear indication mark
Wear
mark
Check the condition of the wear-and-tear marks on the front and
rear brake pads.
If the wear-and-tear of the brake pads has reached the bottom of
indication mark, the pads need to be replaced.
Check the state of wear-and-tear on the front and rear brake discs.
If the front and rear brake discs are worn to the manufacturer's
specified thickness, the brake discs need to be replaced.
1
Limit for usage: 3mm
2
Brake pad usage limit: 2mm
3
The brake disc must be replaced if its thickness is below 3.5mm
Caution
●
Please replace the brake pads at an authorized dealer. Make sure
to replace the left and right brake pads at the same time.
●
Your safety may be at risk if the brake pads are severely worn, and
you fail to replace them in time.
