Fellowes POWERSHRED H-6C Скачать руководство пользователя страница 3

TROUBLESHOOTING

Shredder doesn’t start:

Make sure switch is in auto position (   ).

Make sure safety lock is in unlock position.

Make sure head is on basket correctly. 
Check for jam.

Remove and empty basket.

Wait 30 minutes for motor to cool down.

LIMITED PRODUCT WARRANTY 

Safety Lock prevents accidental operation.       To set, wait for shredding to stop, set control switch to Off (O) position, then slide black button down.
       To unlock, slide black button up. For greater safety, always unplug shredder after use.

Limited Warranty:  Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of 

defects in material and workmanship and provides service and support for 1 year from the date of 

purchase by the original consumer.  Fellowes warrants the cutting blades of the machine to be free 

from defects in material and workmanship for 3 years from the date of purchase by the original 

consumer. If any part is found to be defective during the warranty period, your sole and exclusive 

remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This 

warranty does not apply in cases of abuse, mishandling, failure to comply with product usage 

standards, shredder operation using an improper power supply (other than listed on the label), or 

unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs 

incurred by Fellowes to provide parts or services outside of the country where the shredder is initially 

sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE 

WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential 

or incidental damages attributable to this product. This warranty gives you specific legal rights. 

The duration, terms, and conditions of this warranty are valid worldwide, except where different 

limitations, restrictions, or conditions may be required by local law. For more details or to obtain 

service under this warranty, please contact us or your dealer.

BASIC SHREDDING OPERATION

PAPER/CARD

Continuous operation: 

Up to 3-minute maximum

NOTE:

 Shredder runs briefly 

after each pass to clear entry. 
Continuous operation beyond 
3-minutes will trigger  
30-minute cool down period.

PAPER JAM

PRODUCT MAINTENANCE

15

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

15

Set to Off ( )

Set to Reverse ( 

 ) 

for 2-3 seconds

*Apply oil across entry 

All cross-cut shredders require oil for peak 
performance. If not oiled, a machine may 
experience diminished sheet capacity, intrusive 
noise when shredding and could ultimately 
stop running. To avoid these problems, we 
recommend you oil your shredder each time 
you empty your waste bin.

OILING SHREDDER

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

Alternate slowly back and forth

Set to Reverse ( 

 ) 

for 2-3 seconds

Set to Off ( ) 

and unplug

Gently pull uncut 

paper from paper 

entry. Plug in

Set to Auto-On (   )

 

and resume shredding

Australia Residents Only:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other 

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.  

The benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to the shredder.

Plug in and set to 

Auto-On (   )

1

3

1

3

2

4

6

5

3

Feed paper/card 

straight into paper 

entry and release

When finished shredding, 

set to Off ( )

1

3

2

Отзывы: