2
A. CD/card
entry
B. See safety instructions
C. Paper entry
D. Pull-out bin
E. Window
F. Casters
G. ON/OFF switch
1. OFF
2. ON
Will shred:
Paper, plastic credit cards, CD/DVDs and staples
Will not shred:
Adhesive labels, continous form paper, transparencies, newspaper,
cardboard, laminates, paper clips, file folders, X-rays or plastic other than noted above
Paper shred size:
Micro-Cut .................................................................... 5/64 in. x 1/2 in. (2mm x 12mm)
Card/CD shred size:
Strip-Cut ..................................................................................................9/16 in. (40mm)
Maximum:
Sheets per pass ............................................................................................................. 9*
Cards/CDs per pass ....................................................................................................... 1*
Paper entry width ...............................................................................8-7/10 in. (220mm)
CD entry width ...................................................................................4-8/10 in. (122mm)
* 8.5 in. x11 in., 20lb., (75g)
paper at 120V, 60 Hz, 2.5Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Maximum recommended daily usage rates:
300 sheets per day; 25 credit cards; 10 CDs.
9 sheets per pass to avoid jams.
CAPABILITIES
ENGLISH
Model 450M
KEY
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
15
• Operation, maintenance, and service requirements are covered in the instruction
manual. Read the entire instruction manual before operating shredders.
• Keep away from children and pets. Keep hands away from paper entry. Always set
to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder
openings. If object enters top opening, switch to Reverse (
) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Do not use if damaged or defective. Do not disassemble shredder.
Do not place near or over heat source or water.
• This shredder has an ON/OFF Switch (G) that must be in the ON (I) position to
operate shredder. In case of emergency, move switch to OFF (O) position. This
action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Shredder must be plugged into a properly grounded wall outlet or socket of the
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
• Unplug shredder before cleaning or servicing.
15
15
H. Control Panel and LEDs
1. Overheat (red)
2. Remove paper (yellow)
3. ON/OFF and Bin open (green)
4. Reverse
5. Auto
6. Forward
F.
A.
D.
E.
H.
C.
B.
G.
