Fellowes PB 55, Руководство пользователя

Страница: 7 / 9

5
If you try to punch in batches of more than 8 sheets or 1 cover, you may cause your machine to j a m. If
this happens, you will not be able to push the lever
$
completely down to the horizontal position. To
avoid damaging your machine, d o not te ar o ut she ets in an effort to clear the jam. This will clog the
cutting area with paper and probably make a repair necessary. Instead, raise the lever
$
back up and
lower it with as much strength as you can, repeating this until you have cut through all of the sheets.
M a i n t e n a n c e
Strictly speaking, there is no maintenance required for your machine except occasionally wiping it off
with a soft cloth dampened with plain water. You can, however, help extend its life if you always:
• Make sure documents and covers are clean and free of metal, and
• Empty the waste drawer
&
regularly to prevent debris from interfering with the dies.
Troubleshooting
If you experience a problem with your machine, you may be able to solve it quickly yourself:
• St uck le ver
$
. Your machine is jammed, most likely due to punching too many sheets at one time. Do
not try to tear out the document. Follow the jam-clearing procedure described under O p e r a t i o n .
• Pa rt ial las t hole. Sheets are not perfectly aligned. Adjust the centering of your document, as
described under O p e r a t i o n .
• Punch holes not pa ra llel t o edg e. Debris is stuck below the dies. Take a ruler or stiff cardboard and
slide it into the comb-punch entry
(
, moving it back and forth to release cuttings into the waste drawer
&
.
• Da ma ged hole edg es . You may be trying to punch too many sheets at one time. Reduce the number
of sheets per batch.
If these measures do not solve the problem, please contact us through one of the many channels listed
under
Customer Service . SAF ETY RE MI NDE R : Do not attempt to repair your machine.