1
KEY
CAPABILITIES
ENGLISH
Model P-12C
Will shred:
Paper, small paper clips, credit cards and staples
Will not shred:
Continuous forms, CD/DVDs, adhesive labels, transparencies,
newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic
other than noted above
Paper shred size:
Cross-Cut ........................................................ 5/32 in. x 2 in. (3.9mm x 50mm)
Maximum:
Sheets per pass .................................................................................................12*
Cards per pass .....................................................................................................1*
Paper width ......................................................................................9 in. (229mm)
* 8.5 in. x11 in., 20lb., (75g)
paper at 120V/60 Hz, 5.0Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Recommended daily usage rates: 10-20
paper passes; 10 credit cards.
12 sheets per pass.
Fellowes SafeSense
®
shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
H. Control switch and LEDs
I 1. Auto-On
O 2. OFF
R 3. Reverse
4. Standby (green)
5. SafeSense
®
Technology
(yellow)
6. Overheat (red)
A. Shredder head
B. Paper/credit card entry
C. Pull-out bin
D. Window
E. Safety lock
F. Disconnect power switch
G. See safety instructions
A.
G.
B.
H.
F
D.
C.
15
15
15
• Keep away from children and pets. Keep hands away from
paper entry. Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. –
away from shredder openings. If object enters top opening,
switch to Reverse (R) to back out object.
• Never use aerosol products, petroleum based lubricants or other
flammable products on or near shredder. Do not use canned air on
shredder.
• Do not use if damaged or defective. Do not disassemble
shredder. Do not place near or over heat source or water.
• This shredder has a Disconnect Power Switch (F) that must be in the
ON (I) position to operate shredder. In case of emergency, move
switch to OFF (O) position. This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Do not put foreign objects in paper entry.
• The grounded socket-outlet shall be installed near the equipment and
shall be easily accessible.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
Breakthrough Safety Technology! SafeSense
®
stops shredding when hands are too close to the opening.
E.
