background image

LAMINATOR CONTROLS

IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE

4

ENGLISH

E

A

   

On / off switch

B

   

Standby / Power on button

C

  

Auto(hot)/Cold button

D

  

Reverse button

E  

Carry handles

F

   

Pouch / document entry slot

G

  

Entry shelf (illuminated)

H

  

Pouch / document exit

I

   

Illuminated user interface

J

  

Exit tray

CAPABILITIES

Performance

Entry width 

12.5”

Pouch thickness (min.) 

3 mil (per side)

Pouch thickness (max.) 

10 mil (per side)

Estimated heat-up time 

1 minute

Cool down time 

30-60 minutes

Lamination speed  

up to 30”/min

Number of rollers 

6

Ready indication 

Light & beep

Manual reverse function 

Yes

Clear Path / Anti-jam engine 

Yes

LED interface 

Yes

Sleep Mode 

Yes (30 mins)

Photo-capable Yes
Carrier-free Yes
Exit tray 

Yes 

Technical Data

9

oltage 110-120

9

 AC

Frequency 60Hz
Wattage 1300 

Watts

Amps 11 

Amps

Dimensions (HxWxD) 

4.75”x21.5”x6.75”

Net weight 

14lb

Max document thickness 

.03”

- The machine is for indoor use only. Plug the machine into an easily accessible outlet.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall 

socket.

DO

 ensure the machine is on a stable surface.

DO

 test laminate scrap sheets and set the machine before final 

laminations.

DO

 remove staples and other metal articles prior to laminating.

DO

 keep the machine away from heat and water sources.

DO

 turn off the machine after each use.

DO

 unplug the machine when not in use for an extended 

period.

DO

 use pouches designed for use at the appropriate settings.

DO

 keep away from pets, while in use.

DO NOT

 leave the power cord in contact with hot surfaces.

DO NOT

 leave power cord hanging from cupboards or shelves.

DO NOT

 use appliance if the power cord is damaged.

DO NOT

 attempt to open or otherwise repair the machine.

DO NOT

 exceed the machines quoted performance.

DO NOT

 allow minors to use this machine.

DO NOT

 laminate sharp or metal objects (eg: staples, paper 

clips).

DO NOT

 laminate heat-sensitive documents (eg: tickets, 

ultrasounds etc) on hot settings.

DO NOT

 laminate an empty pouch.

406813B_NA_Jupiter2_v1.5_A5_All_Langs_09-08-2013.indd   4

8/9/2013   1:56:22 PM

Содержание Jupiter 2















Отзывы: