PRODUCT MAINTENANCE
TROUBLESHOOTING
All high security shredders require oil for peak performance. If not oiled, a machine
may experience diminished sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we recommend you oil your shredder
each time you empty your waste bin or every 15-30 minutes of continuous use.
OILING SHREDDER
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
3
2
*Apply oil
across entry
Press Reverse (R)
Set to Off ( )
and unplug
15
Important: For optimal shredding perfomance, use Fellowes High Security
oil (3505701). *Use of standard shredder oil is not recommended.
R
R
R
R
R
R
R
R
When flashing blue,
too much paper is
inserted. Shredder
will automatically stop
and reverse paper.
2
4
Gently pull uncut paper
from paper entry.
1
1
Shred 1 sheet of
paper to clear
cutters. Resume
normal shredding.
CLEANING AUTO-START INFRARED SENSORS
PAPER JAM
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Paper detection sensors are designed for maintenance free operation. However,
on rare occasions the sensors may become blocked by paper dust causing the
motor to run even if there is no paper present
(Note: two paper detection sensors are
located in the center of the paper entry).
Turn off and unplug
shredder
Locate Auto-start
infared sensor
Clean any contamination
from the paper sensors
1
2
R
R
3
4
Use thin, long-handled brush
to clean sensors. Make sure
brush is clean and dry
TO CLEAN THE SENSORS
ADVANCED PRODUCT FEATURES
Overheat Indicator: When flashing alternatively with On/Off ( ) LED, shredder requires a 10-15, minute cool down period. When ( ) is blue, resume shredding.
Safety Shield Indicator: When flashing alternatively with On/Off ( ) LED, safety shield is open and shredding will stop. To resume shredding, make sure safety shield is closed.
Door Open Indicator: When flashing alternatively with On/Off ( ) LED, the door is open. To resume shredding, make sure the door is closed.
Paper Capacity Indicator: When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper. If necessary, press (R) to run shredder in
reverse. See Paper Jam section below.
Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36053.
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
3
If necessary, press
Reverse (R) to run
shredder in reverse and
then pull uncut paper
from shredder.
SilentShred
™
Technology
SilentShred™ noise quality
shreds without noisy disruptions
Safety Shield
Electronically controlled shield stops
shredder when opened for advanced safety
Auto Shut Off
After 30 minutes of inactivity, shredder
automatically turns off for zero energy
consumption
30
