Fellowes FCH4-DSK-BLK, Инструкция по сборке и эксплуатации

Страница: 6 / 12

Page 6
FlexCharge4 Grommet mount
Grommet Mount
The grommet mount method is similar to the
edge mount method, except here the assembly
is clamped to the edge of a grommet hole rather
than the edge of the worksurface. Minimum
diameter of the grommet hole is 2.3".
Step #1: remove clamp from bottom bracket
• Unscrew the two M5x8 socket cap screws using the M4 Allen key.
— Remove the clamp from the bottom bracket.
Step #2: attach M5x8 screws to bottom bracket
• Install the two M5x8 screws back onto the bottom bracket, leaving about
1
/
8
" exposed between the
screw heads and the bracket.
— With worksurface thicknesses between
0.9" and 2", attach the screws to the lower
two holes.
— With worksurface thicknesses less than 0.9",
attach the screws to the upper two holes.
lower
upper
0.9" to 2" 0.4" to 0.9"
1
/
8
"
clamp
bottom
bracket
M5x8
socket cap
screw