Page 2
Motific Adjustable
Components and assembly
Please review these instructions before beginning the installation. Use the illustrations below to check that all the components
needed for assembly were provided with your order. Do not discard the packaging until the product is assembled to your
satisfaction.
Components
Step #1: attach the assembly hook
If the accessory hook is already installed with tape, proceed to step 2.
• Place the accessory hook in position on the table support, as shown below left.
• Secure the hook in place with tape while the worksurface is installed, as shown below right.
1
base assembly with
adjustment handle (1)
round top (1)
amorphic top (1)
– or–
accessory hook (1)
#10x11/4" wood
screw (4)
table support
accessory hook
handle
Caution
• Maximum weight capacity on table top is 25 lbs. Do not exceed this maximum weight.
#10x3/4" wood
screw (2)
tape
