Page 4
Page 4
Lotus VE
product assembly
step 1
Attach the Tower Pole to the Base Plate
• Choose one of three locations to attach the Tower
Pole to the Base Plate depending on your desk depth.
Furthest set to the rear for 23.6” (600mm), middle set
for 27.5” (700mm) and the front set for 31.5” (800mm)
depth desks.
• Use four M6x25mm bolts and the M4x55mm Allen Key to
attach the Tower Pole to the Base Plate.
step 2
Prepare Clamp
• The base clamp comes pre-assembled to fit standard
thickness desks (see option A image). If your desk is thicker
you can remove the two M6x12mm bolts using the M4x55mm
Allen Key and flip the base clamp (see option B image).
Re-install the M6x12mm bolts using the M4x55mm Allen Key.
• Insert two M8x80mm bolts into the Base Clamp, only a few
turns each..
step 3
Attach Base to Table
• Slide the Base Plate onto the rear of the desk.
• Place the Clamp Bar on top of the M8x80mm bolts.
Ensure the tip of the bolts align to the holes on the
Clamp Bar.
• Tighten the M8x80mm bolts with the M6x95mm Allen Key
until the Clamp Bar is secured to the desk.
option A
option B
M
M
N
O
E
E
N
N
