Page 7
Step #4: clamp power module assembly to worksurface
• Insert the bottom bracket through the grommet hole.
• Attach the clamp to the bottom bracket.
— Fit the keyhole openings in the clamp over the M5x8 screw heads. Tighten the screws securely over
the narrow portion of the keyholes using the M4 Allen key.
• Clamp the assembly securely to the worksurface by tightening the triangle knob.
• Plug the power cord into an AC outlet.
You are now ready to use the two AC power outlets, one USB-A, and one USB-C charging
ports on the FlexCharge4C.
Step #3: attach bracket assembly to power module
• Route the power cord through the opening in the top bracket.
• Attach the top bracket to the rear of the power module
using the two M3x12 panhead screws. Hand-tighten
securely.
power module
bottom
bracket
2"
top
bracket
M3x12
FlexCharge4C Grommet mount
hook keyholes onto
screws and tighten
worksurface
grommet
hole
