Page 7
installed troughs
trough
double-sided tape
rear of
table
M4.8x22
#2 Phillips
round head
Brisa
™
electric table base
assembly
step 8: attach cord-organizing troughs
• Two troughs may be installed to help organize the cords and
cables.
• Peel the backing from the double-sided tape on the bottom of
the troughs. Center the troughs at the rear of the table against
the frame cross channel.
• Secure each trough with three M4.8x22 #2 Phillips round head
screws.
step 9: attach keypad
• Install the keypad on the left or right side of the table, according to user preference.
• Position the back of the keypad 1
1
/
8
" from the front edge of the table, as shown below.
• Attach the keypad using the three M3x18.5 #1 Phillips round head screws.
1
1
/
8
"
M3x18.5
#1 Phillips
round head
keypad
1
1
/
8
"