2
KEY FEATURES AND CONTROLS
CONTROL PANEL
ENGLISH
Model 200C/130C
A. Shredder Lid
B. Manual Feed Slot
C. Casters (200C only)
D. Disconnect Power Switch
1. OFF
2. ON
E. See Safety Instructions
F. Control Panel (see below)
G. Pull-Out Bin
1. Overheat (red)
2. Remove Paper (red)
3. Bin Full (red)
4. Bin Open (red)
5. Reverse
6. On/Off (blue)
7. Start
A.
B.
D.
F.
E.
G.
C.
1.
2.
3.
4.
5.
6.
7.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
15
15
• Operation, maintenance, and service requirements are covered in the instruction
manual. Read the entire instruction manual before operating shredders.
• Keep away from children and pets. Keep hands away from paper entry. Always set
to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder
openings. If object enters top opening, switch to Reverse (
) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Avoid touching exposed cutting blades under shredder lid.
• Unplug shredder before cleaning or servicing.
• Do not use if damaged or defective. Do not disassemble shredder.
Do not place near or over heat source or water.
• This shredder has a Disconnect Power Switch (D) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Shredder must be plugged into a properly grounded wall outlet or socket of the
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
15
15
15
