2
KEY FEATURES AND CONTROLS
CONTROL PANEL
ENGLISH
Model 550C/350C
A. Shredder Lid
B. Manual Feed Slot
C. Casters
D. Disconnect Power Switch
1. OFF
2. ON
E. See Safety Instructions
F. Control Panel (see below)
G. Bin Door
H. Bin (inside)
A. Overheat (red)
B. Remove Paper (red)
C. Bin Full (red)
D. Bin/Lid Open (red)
E. SmartLock
TM
pin pad
F. Reverse
G. Start/Pause (white)
H. Lock (white)
A.
B.
C.
D.
E.
F.
G.
H.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
15
15
• Operation, maintenance, and service requirements are covered in the instruction
manual. Read the entire instruction manual before operating shredders.
• Keep away from children and pets. Keep hands away from paper entry. Always set
to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder
openings. If object enters top opening, switch to Reverse (<) to back out object.
• DO NOT use aerosol products, petroleum based or aerosol lubricants on or near
shredder. DO NOT USE “CANNED AIR” OR “AIR DUSTERS” ON SHREDDER. Vapors
from propellants and petroleum based lubricants may combust causing serious
injury.
• Avoid touching exposed cutting blades under shredder lid.
• Unplug shredder before cleaning or servicing.
• Do not use if damaged or defective. Do not disassemble shredder.
Do not place near or over heat source or water.
• This shredder has a Disconnect Power Switch (D) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Shredder must be plugged into a properly grounded wall outlet or socket of the
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
15
15
15
A.
B.
D.
E.
C.
F.
G.
H.
