NOTE:
Follow these instructions for
best results.
• Place unit at least 2 feet from the wall.
• Keep unit away from drafty areas.
• Keep curtains away from unit, as they
may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective
fi
lm from the
control panel.
2. Remove the front panel by grasping the
bottom outside edges and gently pulling
toward you.
3. Pull out the
fi
lter packages and remove
sealed plastic wrap.
4. Return the
fi
lters to the unit, inserting the
True HEPA
fi
rst with the arrow pointing
toward the back of of the unit and then
insert the carbon
fi
lter. (See page 10)
5. Replace the front panel by hooking the
front panel on the top of the unit. Swing
panel in by pushing gently until the panel
snaps into place.
6. Plug in the power cord to a wall outlet.
7. Press POWER button until short “beep”
is heard.
AIR PURIFIER SET-UP
For the
fi
rst 4 minutes after turning the
unit on, the indicators will
fl
ash while the
unit measures air quality.
1
2
3
5
6
8
4
7
DISPLAY PANEL AP-230PH/AP-300PH
1. MANUAL FAN SPEED
ADJUSTMENT -
Press the + or –
buttons to manually adjust fan speed to
low, medium, high, turbo or auto speed.
2. AIR QUALITY LIGHT INDICATOR -
Green, yellow, and red lights indicate
the purity of your air.
3. FAN SPEED INDICATOR -
Shows current fan speed setting: low,
medium, high or turbo speed.
4. AUTO MODE -
The unit is set to default
to automatic operation when it is
fi
rst
turned on. Air purity sensor monitors
the air and automatically adjusts the
fan speed to keep your air puri
fi
ed. To
go back to auto at any time, press “–”
several times until auto lights up.
5. PLASMATRUE™ TECHNOLOGY -
Safely removes airborne pollutants at
the molecular level instantly neutralizing
viruses and bacteria in the air. Light
indicators show PlasmaTRUE™
Technology in action!
6. CARBON
FILTER
CHANGE INDICATOR -
The red
indicator light will signal when to replace
fi
lter. (Recommended to replace
fi
lter
every three months under normal usage
conditions.) For replacement
fi
lters, see
page 4.
7. TRUE HEPA FILTER CHANGE
INDICATOR -
Green, yellow and red
light indicate when to replace
fi
lter. The
red indicator lights will signal when to
replace
fi
lter. (Recommended to replace
fi
lter every twelve months under normal
usage conditions.) For replacement
fi
lters, see page 4.
8. POWER BUTTON -
This unit is set to
default to automatic operation when
it is
fi
rst turned on. The air puri
fi
er will
automatically sense the amount of
impurities in the air, and adjust the fan
speed accordingly.
6
7
AP-230PH_AP-300PH_ 869011_032211.indd 6-7
AP-230PH_AP-300PH_ 869011_032211.indd 6-7
3/22/11 11:46 AM
3/22/11 11:46 AM