4. Place the new ilters in the main unit.
(Carbon Filter should always be
inserted irst, then the True HEPA ilter
into drawer.)
5. To reset the ilter light once a new True
HEPA and/or Carbon Filter is installed:
a. Be sure that drawer is closed.
b. Turn on the unit.
c. Locate the ilter replacement icon on
the display panel.
d. Press and hold the ilter replacement
icon for 3 seconds until unit beeps.
HEPA Filter icon will lash amber.
Press ilter icon area to alternate
between HEPA and Carbon.
e. Once desired ilter is illuminated, press
and hold for 3-5 seconds. A short beep
will be heard and the light should turn
off. Repeat process for each ilter as
needed.
10
