Fellowes 2T-LX-C36-24-BLK, Руководство по сборке

Страница: 3 / 12

Page 3
TriumphLX Assembly
Step #1: position frame on table
With the table top facing down on a soft, clean surface, arrange the frame as shown below, with the short ends of the top supports toward the rear.
• Position the frame side to side.
— Loosen all eight set screws (if necessary) using the 5mm Allen key. Expand or compress the frame so that the top supports are 1.0" from the edges of the table.
Center the middle portion of the cross channels, then tighten the eight set screws.
• Position the frame front to back.
— With tables that are 24.0" deep, position the rear cross channel 6.5" from the rear edge of the table. With 30.0" tables, position the rear cross channel 9.5" from the
rear edge of the table. These positions of the frame will align the rear of the feet to the rear of the table when the feet are installed in step 4.
Step #2: screw frame to table
• Use the M4.8X22 #2 Phillips round head screws.
• Both the C36 frame and C48 frame require 12 screws, as shown below.
6.5" with 24.0" table
foot for
24.0" table
foot for
30.0" table
top
support
center middle portion
of cross channels
short end
toward rear
cross channels
1.0" 1.0"
9.5" with 30.0" table
loosen
set screws
M10 x 25
socket set screw
front
rear
feet will
align with
rear of
table
cross support
M4.8x22
#2 Phillips
round head