FELLER ENGINEERING RC 130, Руководство пользователя

Страница: 16 / 40

15
11. Turn off when not in use.
12.
Whenever”E5“shown on the screen, press ”OFF“key
to be in waiting mode and then reset again.
Disassemble steam valve
)as illustrated of solid arrow(
1. Remove the steam valve
from outer lid.
2. Press steam valve seat
according to the direction
of arrow, turn the slip
buckle of the steam lid so
that the slip buckle turns on
the buckle.
3. Then open upwards the
steam valve seat to detach
the steam lid and valve seat.
4. Remove the steam seal
form groove and clean it.
Do not twist and pull.
Install steam valve )as
illustrated of hollow arrow(
1. Put the steam seal into
groove according to the
correct direction, do not twist.
2. The steam lid is installed
on the steam valve seat.
3. Press steam valve seat with hand, turn the slip
buckle to the buckling position with the other hand.
The steam lid is buckled until click sound.
4. Correctly insert valve into valve hole on the upper lid.
STEAM VALVE