FELIXprinters FELIX Pro 2, Быстрый старт, Страница: 21 / 28

FELIXprinters Quick Start Manual for the FELIX Pro 2
189.1 / 0
0
189.1 / 0
0
29.8 / 0
0
X: 0.00
Y: 0.00
Z: 0.00
E: 0.00m
SD Mul: 100%
Buf: 0
print 100% ready
Page 21 FELIXprinters Quick Start Manual for the FELIX Pro 2 Page 21
Make sure the heaters are less than 100°C before
turning off the printer to prevent overheating. When the
print has finished the display will indicate ‘print finished’.
The 3D printer will automatically cool down when a print
has finished. Before removing the object it is recommended to let the
bed cool down to 30 °C. To remove large objects it is
recommended to take off the print bed.
4.2 When a print has finished
Caution: Hot!
Page 21
Chapter 4: Print