4
5
NOTE:
- This shaver can be used for wet shaving and dry
shaving. For wet shaving use your appliance with
shaving lather.
- You can use this shaver in the shower and clean
it in the water.
SUGGESTIONS OF USE
- Your
Felix Triforce
Midi Shaver
is used after
recharging.
- Before using for the
first time you need to
recharge the unit fully for
8 hours. Make sure that the
appliance is switched off when recharging.
- Insert the adaptor DC plug into the charging socket and connect the
power plug to the domestic power supply socket. Charging indicator will
start and your appliance will start recharging.
- After you charged your shaver, use it until batteries are totally discharged.
To reach the optimum charge capacity, repeat charging / discharging
process once or twice a year.
- You can either use your appliance with a direct mains connection or
without mains connection after the battery is fully charged for 30 minutes
without interruption. At the end of this duration you should recharge your
appliance.
- If your appliance fails to work after the battery is uncharged and also
when plugged, take it to the nearest
Felix Authorized Service
.
- You can use your shaver both with dry shaving or wet shaving with shaving
foam. You can also use it in the shower.
- Hold your shaver straight with your skin (with 90
0
angle). Move the shaver
both straight and circular movements against the growing direction of beard.
If you use the shaver head for the first time, your skin will get used to the
shaver head after two or three weeks.
- After each use clean the shaver head under
running water, and do not immerse your appliance
completely in water.
- After you shave, place
the protector on the shaver
head again. Avoid applying
pressure over the shaver
head not to damage it.
STYLING / TRIMMING
- Styling/trimming attachment is used for more effective shaves. You can
shape and shorten longer hairs (such as beard, mustache, sideburns).
- Push down styling /
trimming button which is at
the back of your appliance
and use for shaping beard,
mustache and sideburns.
- You can also cut the
hairs on neck using styling / trimming attachment.
- You can cut your beard easily from surface of chin with styling / trimming
attachment.
CARE AND CLEANING
- Do not use such cleaning agents as alcohol, acetone, gasoline, etc.
- You can wipe your appliance’s body with a slightly damped cloth.
- You can easily clean the shaver head, cutter blocks and styling / trimming
attachment under the tap water.
- Switch off your shaver and press the shaver head release button.
- Hold the cutter blocks under water and switch on your shaver. There
won’t be any problem since your shaver has low voltage technology.
- Rapid spin impact of the contrary moving cutter blocks will provide an
excellent cleaning. Turn off your shaver after cleaning. For a better dry and
optimum air circulation, leave your shaver head open.
