Page
11
9.1 Level the Buildplate
Page
11
9 Preparation for printing
IMPORTANT! At this stage, ONLY perform bed leveling as the printer is already factory calibrated.
During this routine, the printer measures the build plate’s top surface to compensate for any irregularities, ensuring an optimal first
layer. A well-printed first layer is crucial for a successful print, and following this procedure with a clean bed will minimize the chan-
ces of failure.
In general calibration is only required when there has something physically changed on the machine.
- Replacing/changing a hot-end
- After transport
- New buildplate
- When you can see the printer is not printing properly
