Felix Storch 3.1 Single, Инструкция по сборке

Страница: 36 / 46

Assembly Manual FELIX 3.1 V1
37
Congratulations you are fi nished with the assembly of the
printer.
Please continue with the user manual.
113
Kapton sheet
note: It is best to place the kapton sticker when the bed is around 40-50
0
C.
This can be done with the computer interface or the display unit. Read the user
manual to learn how to do this.
clean the print-bed surface with detergent, and try to minimize dust particles
onto the surface to prevent bubbles.
Peel off a corner of the large kapton sticker and fold the corner back.
Place the kapton sticker onto the aluminum printbed. Make sure the corners
align.
Slowly peel the backing of the sticker an rub the sticker diagonally onto the
printbed surface. To prevent/minimize bubbles, you can use a credit card.
Peel off a corner