Felix printers Pro 2 Touch, Быстрый старт, Страница: 18 / 28

FELIXprinters Quick Start Manual for the FELIX Pro 2 Touch
4.1 Print from USB
Chapter 4: Print
Page 18
Put the provided FELIX drive into the USB port
on the right-hand side of the display unit.
Enter the print menu by selecting the icon in
the bottom center. Select the fi le Benchy Dual
from the USB list.
Make sure the print bed is clear of any obstruc-
tions. Select to start printing.
Cancel printing
Pause printing
Advanced print settings
The advanced option gives the control to override
Gcode settings during printing. For now leave
the settings as they were, select to hide.
1 2
3 4 5
Tip:
Select ‘Benchy Dual PLA-PLA for a dual
extrusion sample, this will take 2 hr.
Select the Benchy Single PLA if you
want to print a quicker single extrusion
sample of 50 min.