Felisatti RF100/710, Инструкция по эксплуатации и безопасности

Страница: 17 / 53

17
Inside Alignment - 90° joint –
Fig. 13
1. Lay out the workpieces on a work surface
exactly as they are to be joined.
2. Mark layout lines on the inside of the joint
on both workpieces
– Fig. 13A
3. Remove the angle plate from the joiner and
set the adjustable fence to the 45° setting.
4. Select a biscuit size that will not require the
joiner to cut completely through the joint.
5. Clamp the workpiece to a work surface with
the mitered edge facing up.
Fig. 13
6. Align the joiner as shown in Fig. 1 2 and make
the cut.
– Fig. 13B
7. Repeat the cut on the second workpiece.
8. Insert glue and biscuits, assemble, and
clamp until the glue is dry.
Use this chart for the proper fence setting for
joints other than 90º.
# Sides
Fence Angle for
Inside Alignment
4 90°
5 81°
6 75°
8 67.5°
Fig. 13B