tubes are
6N13S
. Tubes can be changed by the user,
to
the following
:
Driver tubes: 6N8S, CV181, ECC32, 5692, 6F8G
§
The use of tubes other than those specified in the "LAMPS" section is prohibited and
may result in danger and damage to the device.
§
This device is not intended for continuous use for more than 8 hours. After that time the
product should be turned off to cool down for the minimum time of 1 hour.
GENERAL SAFETY INSTRUCTIONS
§
Protect the power cord from being walked, pinched or overheated (eg. by the tubes).
Power tubes:6080, 5998, 6N5P, 6N5S, ECC230, 7236, CV2523
§
Unplug this device during lightning storms or when unused for long periods of time.
§
Virtually no backround noise
§
Unrivalled neutrality and sound stage
§
Incredibly detailed and dynamic music scene
Originally, Feliks Audio focused mainly on custom made amplifiers tailored to client's
order. Over the time we have developed many innovative and sophisticated audio
solutions. Thanks to that we have gained valuable knowledge and experience across
broad range of applications. Our amplifiers, among them Espressivo, Elise and Euforia,
have won many supporters across the world.
§
.Unrivalled neutrality and sound stage
Our products offer a perfect blend of passion for honest sound, great attention to technical
details and beautiful finish. We do follow design simplicity, minimizing the number of
elements in projected signal path. Thanks to this approach we ensure that the sound
produced by our devices is pure and true.
Euforia is Feliks Audio flagship headphone amplifier launched in 2017. This beautifully
handcrafted OTL, built around two 6SN7 and two 6AS7G tubes, delivers amazing
dynamism, sound stage and level of details never heard of before in tube amplifiers, at the
same time giving the unmistakably tube sound signature. Euforia's unique design allows
for exceptional sound quality with a broad range of headphones, powerful enough to drive
even demanding low impedance headphones (<32 ohm) including planar magnetics.
WHAT MAKES
EUFORIA
SO SPECIAL?
§
Cross-Feed circuit - a revolutionary solution in tube amplifiers
That`s why we decided to implement user-switchable Cross-Feed function among
selected products. Our Cross-Feed function gives you a possibility to try a more natural,
less clinical–“front facing orchestra” experience – like in real life!
§
Gold plated RCA inputs
§
Improved noise reduction circuit
§
Beautifully hand-crafted
§
Preamp safety circuit
§
Extended 3-year warranty
§
High-end class power transformer
Cross-Feed is a revolutionary solution in the class of tube amplifiers that provides
better control over the listening experience. This is a system that enables more
natural channel separation and wider sound stage by moving a part of the lower
frequency range to the opposite channel.
§
Premium driver tubes
listening to a regular headphones amplifier places you “in the middle of the orchestra” –
with certain instruments being heard strictly in the left ear while others only in the right
one. Depending on the type of music, this can cause discomfort and "listening fatigue".
§
Broad frequency:
8
Hz –
75
kHz
+/- 3dB
§
THD: 0.4 % (300 ohm, 20 mW)
Euforia
is originally equipped with
high quality
tubes. Stock
driver
tubes are
6SN7
power
TECHNICAL SPECIFICATION
AND ELECTRICAL SYSTEM DESCRIPTION
§
Impedance: 100 k ohm
§
Headphones output: Jack 6.3mm
§
AC: 230V / 120V (region dependent, power cord included)
§
Power output: 2
5
0mW
§
Dimensions without tubes: 295x203x165 mm [11,6x8x6,5 inch]
§
Amplification level: 20dB
§
.Impedance: 100 k ohm
Euforia is built with two 6AS7G (also accepts 6080 power tubes and two driver 6SN7 tubes.
Power supply is based on a custom made stabilized toroidal transformer with electronic
ripple suppression. The amplifier is equipped with automatic bias circuit, therefore no re-
tuning is required after changing tubes.Please note that the optimal sound quality will be
reached after approximately 30 – 50 hours of run-in.
§
Frequency response: 8 Hz - 75 Khz +/- 3 dB (300 ohm)
TUBES USED
§
Weight: 7 kg [15,4 lbs]
§
Optimal headphones impedance: 32 -
6
00 ohm
including planar magnetics
Product name
Serial number
Warranty start date
Signature of the warrantor
WARRANTY CARD
This is your warranty card. Make sure your seller has completed all of the
fields below. In the case of a warranty service, include a copy of your
purchase with this card. Please also include a description of the fault with
the card.
Manufacturer: Feliks Audio Sp. z o.o., 42-700 Lubliniec, 2a Tuwima street
§
Prevention of hearing loss
§
Permanent hearing loss may occur if headphones or
earphones are used at high volume for prolonged period of
time
§
Note: To prevent possible hearing damage, do not listen at
high volume levels for long periods
§
Before putting on headphones, lower set the volume to a
comfortable listening level
WARNING
SUPPORT
We wish you many happy hours enjoying your new tube amplifier. Should you have any
inquiries please contact us directly at [email protected] or
contact your local dealer.
Feliks Audio declares that this device complies with the
essential requirements and other relevant provisions of the
Low Voltage Directive LVD - 2014/35 / EU
