felfil evo, Руководство пользователя, Страница: 3 / 42

Complete Kit Manual 3
Warnings
!
Warnings
Felfil S.r.l. does not assume responsibility and expressly disclaim liability for loss, inju-
ries, damage, or expense arising out of or in any way connected with the assembly, han-
dling, storage, wrong use or disposal of the product. Please, read this document before use
Felfil Evo.
Any kind of modification will be at your own risk, and will result in the decay of the warranty.
Felfil S.r.l. does not take any responsibility for damage occurred to people or object, caused by
such modifications or improper uses.
- Do not use vinyl and PVC, they will produce toxic emissions.
- Do not eat or inhale neither the plastic pellets nor the extruded plastic.
- Do not use the extruder if any parts are missing or damaged. If you notice any damage to the
unit, unplug the device immediately and contact the Felfil team for guidance.
Use the device only with specified input power. Using the device with any other input power is
likely to damage the electrical and/or electronic parts of the device.
Remind to keep the equipment out of children’s reach.
Use this device only to extrude plastic filament for 3D printing. No other use has been tested.
- Do not insert screws, nuts or materials unsuitable for extrusion in the catchment area.
- Do not insert your fingers in the feeding windows of the plasticizing screw located on the up-
per side of the pipe.
- Do not insert water in the extruder.
- Do not touch pipe, nozzle and resistor when the extruder is switched on, it may hurt you.
- Do not hit the extruder and its accessories or you could damage the extruder.
- Please, never try to extrude a plastic unless you are absolutely certain you know what type it
is.
- Some polymers can undergo thermal decomposition resulting in potentially toxic fumes. So
always use the Felfil Evo in a well ventilated area, or inprecence of a suction hood (not your
bedroom or inside your house), and understand the thermal decomposition properties of the
polymer you are extruding.
- Be sure to check in on it periodically.
The Felfil Evo Complete Kit is a first-generation, experimental piece of hardware. Treat it as
such.
Basically, use common sense.
If you have questions, write us at support@felfil.com
Caution