Felder FAT 300, Руководство пользователя

Страница: 15 / 20

12
Height adjustable FELDER working table
FAT 300
Note:
Individual installation instructions are found with the machine or the worktop surface.
5 Setup and installation
5.1 Safety instructions
• Before assembling and installing the machine, check to make sure it is complete and in good condition.
• Keep the work area orderly and clean. Components and tools that are not put in their correct place or put away
may be the cause of accidents!
• Ensure that there is sufficient space to work around the machine.
5.2 Floor space requirement
Fig. 5-1: Space requirements/Measurements
Installation site requirements:
• Operation/room temperature: +10° to +40° C
• Ensure that the work surface is sufficiently stable and
has the proper load-bearing capacity
• Provide sufficient light at the workstation
• Ensure there is sufficient clearance for or from
neighbouring workstations
To operate and maintain the machine, leave a min. of
500 mm space all around the machine.
Warning! Risk of injury! An incomplete, faulty or damaged machine can lead to serious physical injury or
equipment damage. Only assemble and install the machine if the machine and its parts are complete and
intact.
Warning! Risk of injury! Improper assembly and installation can lead to serious physical injury or equipment
damage. For this reason, this work may only be carried out by authorised, trained personnel who are familiar
with how to operate the machine and in strict observance of all safety instructions.
Setup and installation