FAQ • VIMBLE 2A
8) How do I reset the Wi-Fi settings on the gimbal?
When the gimbal is on, press and hold the trigger button and the shutter button,
then push down the roll control stick (the one on the right side).
Note:
After resetting the Wi-Fi settings, the connection status in the App will
disappear.
The red indicator light will flash twice repeatedly
If there are no signs from the App and indicator, please try resetting again.
9) How to set up the connection between Vimble 2A and Ricca camera?
When both the gimbal and Ricca are turned on, the connection will be made
automatically.
If the gimbal was turned off first, the Ricca will automatically turn off too.
10) How do I make motion time-lapse with the gimbal?
1
Connect the app, gimbal and camera, switch the camera to time-lapse mode
from the app, then enter the motion trajectory setting page.
2
To set up the motion track, turn the camera to the start & end point and then
tap “add framing point” to set the start point and end point.
3
Set the rotating time.
4
Start filming time-lapse manually from the camera.
5
Tap “start” on the Feiyu ON app to start auto rotation.
11) How do I shoot motion time-lapse with Ricca on the Vimble 2A?
First disconnect the Vimble 2A and Ricca, and make sure the Ricca is turned off;
Connect Feiyu ON with Vimble 2A, and set up the motion track;
Turn on the Ricca camera, manually start the time-lapse function on the touch
screen;
When finishing the timelapse, quit the Feiyu ON APP and reboot the Ricca
camera.
