(2) Loosen the roll axis knob ring, slide the cross arm
to balance the camera. Then tighten the roll axis
knob ring, and tilt the camera to left or right, if the
camera can stay stable means balanced.
06
www.feiyu-tech.cn
Cross Arm
move
Roll Axis Knob
Ring
Loosen
* Please tighten the tilt axis knob ring after balanced the tilt axis.
Balance Adjustment of the Roll Axis
2
* Please tighten the roll axis knob ring after balanced
the roll axis.
Horizontal Plane
Horizontal Plane
Tilt Axis Knob
Ring
Loosen
(3) Loosen the tilt axis knob ring, rotate the tilt axis to any angle, and slide the sliding arm slightly,
until the camera can stay stable. Then tighten the tilt axis knob ring to finish the balance.
（If the camera cannot be parallel with the horizontal plane after balancing, repeat the steps
above until it is parallel.）
Sliding Arm
move
(1) Unlock the roll axis position lock, put gimbal on a
horizontal plane.
（Loosen the roll axis knob ring a little to let the cross
arm can be moved）
Steps
