FeiyuTech 41AP / 41AP Lite Power Voltage Calibration
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
- 2 -
For example: Actual voltage of the batteries V0 =15.76 V ;
Voltage display on the GCS V1=15.5 V
Voltage Ratio C=15.74/15.5*100=1.017*100=102
( 6 ) Settings of voltage calibration: Click on
“Read” button in page ”para1” on
parameters settings toolbar, read out the current parameters in the AFSS module.
The default parameter of
“ V correct ” is “ 0 ”.It means that the voltage display without
calibration. If the voltage is need to be correct, please calculate the voltage ratio
"C" according to the above steps
，
then enter into the
“ V correct ” editing box , click
on
” Set ” button to confirm the setting of this parameter ( For example : 102) . After
finish the power voltage calibration, please click on
“Save” button to save the setting
to the AFSS module, otherwise the autopilot will restore the original settings after
power off.
( 7 ) After the voltage calibration success, the voltage display on the GCS (
“BAT1”)
is the power voltage which have been calibrated .
Without changing any devices ( FY-41AP/FY-41AP Lite AFSS module or power
manager ), voltage calibration and
“Save” operation only need for once .
