16
Follow status indicator
Descriptions
P T R
Lock mode
Figure: Light on Light off
11. Protection mechanism
State
Status
Battery is too low
Gimbal power off after alarm sound
Temperature is too high
Gimbal enter standby mode after alarm
sound, and send message to App
Power on gimbal without load
Overload
Software conflict
Gimbal power off after alarm sound, and
send message to App
Remove smartphone after powered
on gimbal
Gimbal enter standby mode with green
breathing light, and after leaving gimbal
in standby mode for 10 minutes, it will
auto power off
Power on gimbal when lie it down
Others
Gimbal power off after alarm sound, and
send message to App
12. Gimbal Initialization
Initialization the gimbal when:
(1) The camera is not in level.
(2) Not use for a long period of time.
(3) The ambient temperature changes abruptly.
Method:
Method 1: Initialize via App (Reset gimbal parameters).
Method 2: Press album button and mode button together for 1 second;
Please refer to the form in
chapter 10.1 in P15
to check the indicator status.
Note: if the initialization is unsuccessful for a long time, please restart the
gimbal and retry.
