- 9 -
4.2 Balancing the roll axis
a. Toggle the roll lock
①
levers to the
unlocked position, check the direction
which the camera tilts to.
b. If the camera tilts to one side, then the
camera is that side heavy, loosen the cross
arm lock knob
②
and then move the cross
arm
③
to the opposite direction, until the
camera can stay still and horizontal to the
ground.
c. Tighten the cross arm lock knob
②
.
The roll axis is balanced when the camera
can stay still and horizontal to the ground.
2
1
3
4.3 Balancing the pan axis
a. Toggle the pan lock
①
levers to the
unlocked position. Hold the tripod, and tilt
the gimbal forward until it is horizontal to
the ground.
b. If the camera tilts to one side, then
the camera is that side heavy, loosen
the vertical arm lock knob
②
and then
move the vertical arm
③
to the opposite
direction, until the camera can stay still
and horizontal to the ground.
c. Tighten the vertical arm lock knob
②
.
The pan axis is balanced when the camera
can stay still and horizontal to the ground.
1
2
3
4.4 Using the memory slider
Feiyu SCORP Pro come with the memory slider which can make balancing easier.
After balancing the gimbal, move the memory slider to the hole in axis, and make the
red dot on the memory slider exposing from the hole, in order to mark the current
position.
Next time, If the objects which users mount on are the same, users can just move the
axis to the position which can make the red dot exposing from the hole to make the
gimbal balanced.
Содержание SCORP PRO
Страница 1: ...Instructions V 1 1 Tutorial Videos ...