Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn Email:[email protected]
29
B.
Altitude Initialization: click to initialize the altitude, in order to pick up the altitude of your
position , and will be used in the 3D path setting, if not get the local altitude it may be
caused that the waypoint path or flight path won‘t be displayed(they are covered)
C.
Downlink data rate: set the downlink data rate to the Autopilot.
D.
Uplink data rate: set the uplink remote control data rate to the Autopilot.
E.
Export Waypoints: export the waypoint path which you have set well in the GCS software to
your computer.
F.
Import Waypoints: import the waypoints path which you have saved in your computer to the
GCS software.
4. ―Language‖ menu includes:
A. English: select the interface for the GCS is the English version.
B. Simplified Chinese
：
select the interface for the GCS is the Simplified Chinese version.
C. Traditional Chinese
：
select the interface for the GCS is the traditional Chinese.
FY-GCS Toolbar
1、
These three buttons display the current remote mode of the autopilot , if the button turn green
means the current state activated.
2、
These two buttons display the current flight mode of the autopilot. Button turns green means fly
in this mode.
3、
These four buttons display the current special flight mode of the autopilot. Button turns green
means fly in this mode.
4
、
Connect the GCS software with the autopilot, have to select the correct serial port and the baud
rate
